Lucerne WebSDR - Switzerland - by HB3XDC
Antenna:
Hari Delta Loop / 80m and Diamond X50-NA at urban noise level
(https://cdn-bio.qrz.com/c/hb3xdc/82922_259_1679247156339_photo_1_.jpg)
RX:
RX888mk 2 and RTL-SDR v3 stick on 70cm - Other hardware in User for old WebSDR
(https://i.ibb.co/QHTftRs/20240902-185047-27.jpg)
PC:
HP EliteDesk 800 G2 PC
Intel® Core™ i5-6600T CPU @ 2.70GHz × 4
Ubuntu 22.04 LTS
VHF
http://websdr.hb3xdc.ch:8073/
HF
http://websdr.hb3xdc.ch:8074/
Classic WebSDR
http://websdr.hb3xdc.ch:8901/
73 de HB3XDC
Nice setup....me like! ;D
Mine it by far less....will post pictures in a few days.
Thinking about adding another RTL-SDR for 2m Band.
Is there any interest in 2m Band, or maybe any other frequency range that someone who reads this would like to see on a PhantomSDR+?
Quote from: Bas on Sep 02, 2024, 07:11 PMNice setup....me like! ;D
Mine it by far less....will post pictures in a few days.
Thank you Bas :)
Why not use the SDRplay for that?
As it's 16bit and can do 4MHz with PhantomSDR+...unlike the 8bit RTl-connector.
AND on top it's far better then an RTL-stick.
Hello Guys.. 8)
Good Idea, will connect a RSP1a to the VHF Antenna, hope to get it work stable with rx_sdr, always was bit tricky ;)
Seems you never received the activation-email, so I activated you by hand.
You may want to use google-mail or so, as your provider blocks a lot.
Quote from: hb3xdc on Sep 02, 2024, 07:44 PMGood Idea, will connect a RSP1a to the VHF Antenna, hope to get it work stable with rx_sdr, always was bit tricky ;)
Well it's not bad as long as you stay below 6MHz, but I would not use Soapy with the Api 3.xx, as it crashes.
Find the API2.xx plugin, use that, far more stable.
Quote from: Bas on Sep 02, 2024, 07:46 PMQuote from: hb3xdc on Sep 02, 2024, 07:44 PMGood Idea, will connect a RSP1a to the VHF Antenna, hope to get it work stable with rx_sdr, always was bit tricky ;)
Well it's not bad as long as you stay below 6MHz, but I would not use Soapy with the Api 3.xx, as it crashes.
Find the API2.xx plugin, use that, far more stable.
Will try to use it for full 70cm band at 5MHz BW, somehow last time I installed it for Jean at Zug WebSDR we got only API3.xx to run it, I'll try my luck again with API2.xx
I have tried API 3.xx and it simply crashed for no reason, like it did my times before when I used it for my RSP_TCP driver.
Never got it stable, and yet again it proved to be a bad API.
Stupid thing is, I informed John (big boss of SDRplay) about the problems of the 3.xx API but he didn't want to hear about them.
So sad, as this beatifull product is hindered by poor API-deamon.
You can allways use the RX888 at 4MSPS ;D
Did some quick n dirty mods in the app.svelte for my servers:
http://sardinia-sdr.ddns.net:8073/
http://websdr.hb3xdc.ch:8074/
my Mods to frontend can be found here:
https://www.swisstransfer.com/d/ab8b0c08-f52d-4157-9fdd-a45157754f90
Quote from: hb3xdc on Nov 26, 2024, 11:42 PMDid some quick n dirty mods in the app.svelte for my servers:
http://sardinia-sdr.ddns.net:8073/
http://websdr.hb3xdc.ch:8074/
my Mods to frontend can be found here:
https://www.swisstransfer.com/d/ab8b0c08-f52d-4157-9fdd-a45157754f90
Thank you, all done with some difficulties, but DONE!...