my PhantomSDR Plus is not working anymore - c'ant find bootloader - I did a new installation but still does not work :-(
Did you change the bootsystem from/to UEFI to OLD or vise versa? Then Grub won't work.
Check your BIOS for activated bootsystem.
Often gets you by suprise :'(
Also, when it's set to UEFA, your harddisk must have a FAT UEFI partition, if you don't have it, UEFI mode will not start.
Ok, had the same problem....check lsusb see if the RX888 is still seen, I had the same issue just now, needed to reconnect the RX888.
Thanks BAS - Gianni helped me - Problem solved - the RX888 was not recogniced by the PC - Hard boot PC - solved :-)
Well this isn't good if it's gone from the USB-port, this happened to me too and a few days later it died.
Did your RX888 had the thermal-mod? If no, stop using it and modify it first....else it WILL die soon.
OK, I can't proof it, because my RX888 is at the remote site at 1'660m. But I will decrease die speed from 60 Mbit/s to 58 Mbit/s. I was using first my RX888 always with 58 Mbit/s and never had issues that time.
I installed today a large CPU heatsink on my RX888 at home and am now running it for a few days with sps 60000000. Let's see if it crashes.
Strange, I can not upload pictures !!! The JPEG File is only 22 kBytes in size. Error message: Server responded with 500 code 0.3 MB
73 de HB9RYZ
Wolfgang
Stupid shoutbox prevented the upload of attachments....how silly is that?
I have remove the shout for now until I find one that doesn't hinder attachments.