Print Page - CW isn't working as should.

Title: CW isn't working as should.
Post by: Bas ON5HB on Sep 02, 2024, 08:51 PM

CW should point and shoot like AM-stations, marker in the midle of the morse.

Bandwidth about 500Hz total. So 250Hz lef and right of the marker.

The marker should hold the frequency....like DCF77...it's at aboput 77.5KHz...

At the moment it's point, click and miss....

Title: Re: CW isn't working as should.
Post by: magicint1337 on Sep 07, 2024, 12:43 PM

CW will look like this in the coming 1.5.4

https://ibb.co/0MHyyq8

Title: Re: CW isn't working as should.
Post by: Bas ON5HB on Sep 08, 2024, 10:48 AM

Excelent!!! CW is working now....perfect.

Title: Re: CW isn't working as should.
Post by: bh4rrg on May 29, 2025, 12:20 AM

In 1.5.4
CW mode
when touch -100hz , the marker in waterfall will not work correctly and cannot recieve the morse , because the cental frequence of filter is on -50hz, and need turn the frequence to +50hz for recieving the same morse.

Title: Re: CW isn't working as should.
Post by: Bas ON5HB on May 29, 2025, 01:56 PM

You change the Bandwidth not the Frequnecy. Wrong button.

PhantomSDR Support Forum

General Category => PhantomSDR Bugs => Topic started by: Bas ON5HB on Sep 02, 2024, 08:51 PM